Septic tanks with partial biological processes

Septic tanks with partial biological processes are used to extract floating and removable substances. Due to the sizing of 1,500 l per inhabitant, the wastewater passes through the system in approx. 10 days. This allows the microorganisms that have emerged in the sludge to effect partial breakdown of the organic waste, in addition to pure mechanical purification (partial biological purification). These septic tanks require 1,500 l per inhabitant and must comprise at least 3 chambers.

  • Low weight: can also be installed in difficult local conditions without a crane
  • Reasonable purchase and installation costs. Compare!
  • Low maintenance: maintenance or cleaning work can be performed through the shafts
  • Tanks can be used as rainwater harvesting systems after thorough cleaning

Advantages

Thought-out in every detail

Groundwater stable
Groundwater stable
Groundwater stable

The tank can be partially or completely installed in groundwater. Please note the maximum immersion depths and necessary ground covers in the technical data.

Telescopic/Tiltable
Telescopic/Tiltable
Telescopic/Tiltable

The telescopic dome shafts are height-adjustable and can be tilted by 5 degrees. This makes it easy to adapt to the upper edge of the terrain.

Free of remediation
Free of remediation
Free of remediation

Due to the constant contact with wastewater, concrete tanks are always at risk of corrosion. Depending on the degree of damage, this can result in expensive renovation of the tank. Plastic tanks are not at risk of corrosion due to their nature.

Groundwater stable

The tank can be partially or completely installed in groundwater. Please note the maximum immersion depths and necessary ground covers in the technical data.

Telescopic/Tiltable

The telescopic dome shafts are height-adjustable and can be tilted by 5 degrees. This makes it easy to adapt to the upper edge of the terrain.

Free of remediation

Due to the constant contact with wastewater, concrete tanks are always at risk of corrosion. Depending on the degree of damage, this can result in expensive renovation of the tank. Plastic tanks are not at risk of corrosion due to their nature.

Sizing

Inh.Volume [l]Length [mm]Width [mm]Height [mm]Weight [kg]order no.add to enquiry
1013000239021902390265On request

calculated size Request for information

Downloads